Difference between revisions of "Editorial Update/Textual Amendments/Substitutions/Provision Level Substitutions"

Latest revision as of 06:49, 25 April 2025

OVERVIEW

Substitution of words

Whole extent - wholly in force

https://www.legislation.gov.uk/uksi/2020/1045/regulation/3/2021-03-29

How to carry out a substitution of words

Whole extent - partially in force

See retained text substitution of words in 2014 c. 12, Sch. 8 para 3(2).

Note: The first set of words in brackets is the retained text and the second set of words is the substituted text (for specified purposes).

How to carry out a substitution of words

Limited extent - wholly in force

https://www.legislation.gov.uk/ukpga/2009/23/section/85/2015-03-12

Note: The first set of words is the original text that has been retained and the second set of words is the substituted text for E.W. only.

How to carry out a substitution of words

Substitution of a provision or sub-provision

Whole extent - wholly in force

https://www.legislation.gov.uk/ukpga/2009/1/section/8

How to carry out the substitution of a provision or sub-provision

Whole extent - partially in force

Whole provision substituted for specified purposes:

https://www.legislation.gov.uk/uksi/2010/2214/regulation/23/2013-01-09

Sub-provisions substituted for specified purposes:

S. 80(1)(2) substituted (26.10.2023 for specified purposes) by Economic Crime and Corporate Transparency Act 2023 (c. 56), ss. 21(1), 219(1)(2)(b)

How to carry out the substitution of a provision or sub-provision

Limited extent - wholly in force

Limited extent substitution of a sub-provision

S. 33(3) substituted (E.W.) (9.2.2009) by Local Transport Act 2008 (c. 26), s. 134(4), Sch. 4 para. 59(2); S.I. 2009/107, art. 2(1), Sch. 1 Pt. 1

Note: For limited extent whole provision substitutions, it may not be possible to carry out a limited extent amendment without creating concurrent versions. Speak to a Review Editor for advice in this situation.

How to carry out the substitution of a provision or sub-provision

IN MORE DETAIL

Related reading: Approach to Update - Some Basic Rules and Exceptions, Specific Update Issues, Update Troubleshooting, Limited extent amendments, Applying partially in force amendments which are then brought further into force over time, Update Editor Checklist

Important considerations

Before you commit yourself to carrying out your amendment, make sure that you have considered all the factors that will influence how you carry it out.

The effects spreadsheet that you download at the start of the update task contains all the information that was recorded for the effect you are applying. You should check the TOES data for your amendment before you start. In particular, check the Comments for Editor to see if there is anything unusual about the effect that you need to be aware of, or if the amendment text contains power. Also look at the commencement details of the affecting document and look at the affecting provision itself.

Questions to consider:

Is the effect wholly in force or partially in force? Is it whole or limited extent? Has your affecting provision itself been amended by an amendment to earlier affecting provision effect? Is there an appended commentary for the effect? Is your effect a knock-on effect? Does your substituted text contain power? Are there any savings or transitional provisions?

The answers to these questions will inform how you carry out the amendment, whether you need to amend any of the attributes of the provision you are amending, also what the annotation that the Editorial System generates will look like and whether there are any amendments you might need to make to this annotation.

Use the Update Editor Checklist to make sure that you have researched everything you need to before you carry out your amendment and refer back to it throughout the task, particularly when you check the amendment in XMetaL and preview your amendment.

The following pages also give useful guidance that will help if you are not sure how carry out your amendment:

Limited extent amendments

The Editorial System flags possible limited extent amendments with the following message:

The extent of the affected and affecting provision is highlighted in red. You can also view the extent/TA in the effects spreadsheet that can be downloaded from the Starting Update Page.

To decide whether or not you need to carry out your amendment using the limited extent amendment option in XMetaL, follow the decision-making process described in the Decision tree for deciding what is a limited extent amendment on the Limited Extent Amendments page, where you may also need to consider creating a concurrent version of the provision (and subsequently carrying out the amendment fully in the relevant version of the provision).

You may find that your amendment has already been carried out as a limited extent amendment for another jurisdiction, in which case you will need to follow the guidance on Updating an existing limited extent amendment when an identical amendment is applied for another jurisdiction.

If, after making all the considerations outlined above, you decide that the amendment is indeed a limited extent amendment, when you get to Step Two, follow the method outlined in Step Two – limited extent (the other steps remain the same).

Partially in force amendments

Amendments are not always brought wholly into force at once, frequently they are brought into force gradually over two or more points in time (PiTs). This is described in more detail in the section on Partially in force amendments on the Applying partially in force amendments which are then brought further into force over time page.

If a substitution has been brought into force for specified purposes only, the commencement “for specified purposes” will get added after the in force date when the annotation is generated, and the existing text may need to be retained alongside the substituted text.

Before deciding whether to retain text for an amendment that is only partially in force, you should consider the nature of your update task and whether the amendment will come fully into force during the course of your update task. See Applying partially in force amendments which are then brought further into force over time, and in particular What happens when an amendment comes further, or fully into force?, for more details about retained text repeals that are brought into force over time.

See the examples in the Overview: Substitution of words - whole extent - partially in force and Substitution of a provision - whole extent - partially in force.

Update process

In these instructions, the update process has been broken down into four steps, Steps 1-3 are carried out in XMetaL and Step 4 on the Editorial site after check-in. Steps 1 and 2 are explained separately for substitutions of words and sub-provisions (and Step 2 is further subdivided into whole extent (wholly in force or partially in force), limited extent retained text amendments). The checks made in Steps 3 and 4 are the same, whichever route you take to get there.

Carrying out and checking the amendment in XMetaL:

Step One - preparing to carry out the amendment in XMetaL

Step Two - selecting the correct XMetaL Legislation menu option to carry out the amendment

Step Three - checking the amendment in XMetaL

Checking the amendment in the Editorial System:

Step Four - preview the amendment from the Update Details page

Things to remember

The Specific Update Issues guidance includes some general Editorial Update reminders to be aware of before you carry out your amendment. Also included is information on how amendments are presented. Note, in particular, there may be tagging that may need to be removed from amendment text, to prevent formatting errors.

Carrying out a substitution of words in XMetaL

The amendment of the data is carried out in XMetaL and the instructions that follow assume that you have checked out the relevant provision that is to be amended, that you have set up your XMetaL workspace, and that you are now ready to carry out the amendment. For guidance on the steps required to reach this point, see Starting Update Tasks.

Notes:

When you are substituting words, any commentary reference included in the existing text you highlight will be removed automatically when the text is substituted, and if this commentary reference relates to a single annotation then that annotation will also be removed automatically on check-in.
Occasionally there may be multiple substitutions of the same words throughout a provision. As long as the same task in the Resource Manager window is highlighted on each occasion, it is possible to carry out the same substitution of words and generate the same commentary reference (linking to the same annotation) each time, without any unnecessary new footnote references or annotations also being created.

Step One In the amending provision window: Read what the amendment is and where in the amended provision it is to be made. Highlight and copy the word or words (including punctuation) to be substituted. You can right-click and copy or use the standard ‘edit’ and ‘copy’ menu options from the menu bar. In the amended provision window, highlight the existing text that is to be substituted. In the Resource Manager window single click on the task to highlight it. Your next action will be determined by whether the amendment covers the whole extent and is wholly in force or is for a limited extent, or whether it needs to be a retained text substitution (e.g. In Force Date Qualification ‘for specified purposes’ or type of effect ‘substituted for specified purposes’), consequently Step Two is described separately for each of these scenarios.

Whole substitution

Step Two - whole extent and wholly in force substitution of words On the menu bar at the top of the page select Legislation - Textual Amendments - Substitution. This will: Automatically substitute the new word or words for the existing text, bracketed by opening `<ukl:Substitution>` and closing `</ukl:Substitution>` tags in the amended provision. Automatically insert the annotation for this amendment at the end of the amended provision, e.g. Words in sch. 1 substituted (28.11.2018) by The Budget (Scotland) Act 2018 Amendment Regulations 2018 (S.S.I. 2018/363), regs. 1(1), 3(2)(d)(i) Generate a green tick next to the task in the Resource Manager window to show that it has been completed. Once the amendment has been made, the cursor will be situated at the point the automatic annotation was inserted in the amended provision window. Your next task will be to check the amendment in XMetaL (Step Three), followed by the final task of previewing the amendment from the Update Details page (Step Four).

Limited extent substitution

Step Two - limited extent substitution of words On the menu bar at the top of the page select Legislation - Textual Amendments - Limited Extent Substitution. In the pop-up XMetaL Author Essential, check the Extent entered is correct and click OK. This will: In the amended provision, retain the existing word or words, bracketed by opening `<repeal>` and closing `</repeal>` tags, and next to this insert the new word or words, bracketed by opening `<addition>` and closing `</addition>` tags. Automatically insert the annotation for this amendment at the end of the amended provision, including the limited extent in brackets after the effect, e.g. Words in Sch. 1 para. 6 substituted (E.W.) (1.1.2017) by The Environmental Permitting (England and Wales) Regulations 2016 (S.I. 2016/1154), reg. 1(1), Sch. 29 Pt. 1 para. 20(b) (with regs. 1(3), 77-79, Sch. 4) Generate a green tick next to the task in the Resource Manager window to show that it has been completed. Once the amendment has been made, the cursor will be situated at the point the automatic annotation was inserted in the amended provision window. Your next task will be to check the amendment in XMetaL (Step Three), followed by the final task of previewing the amendment from the Update Details page (Step Four).

See the Overview for an example of a limited extent substitution of words. Further reading on limited extent amendments can be found here.

WARNING: There is a bug in the limited extent amendment code that means that limited extent amendments to headings results in false E-notes being created - look out for this and remove any false E-notes.

Retained text substitution

If your amendment has only been brought into force for specified purposes, you may need to carry out a retained text substitution to make sure that the existing word or words are retained alongside the newly substituted word or words.

For further guidance on retaining text for partially in force amendments see partially in force amendments. Check with a Review Editor if the amendment is not straightforward and you are not sure whether to retain text or not.

Step Two - retained text substitution of words On the menu bar at the top of the page click Legislation - Textual Amendments - Substitution Retain Text. This will: Retain the existing word or words, bracketed by opening `<repeal>` and closing `</repeal>` tags, and insert the new wording, bracketed by opening `<addition>` and closing `</addition>` tags. Automatically insert the annotation for this amendment at the end of the amended provision, including the In Force Date Qualification (for partially in force amendments), e.g. Words in Sch. 7 para. 5(7) substituted (31.1.2017 for specified purposes) by Policing and Crime Act 2017 (c. 3), s. 183(1)(5)(e), Sch. 2 para. 122(3) Generate a green tick next to the task in the Resource Manager window to show that it has been completed. Once the amendment has been made, the cursor will be situated at the point the automatic annotation was inserted in the amended provision window. Your next task will be to check the amendment in XMetaL (Step Three), followed by the final task of previewing the amendment from the Update Details page (Step Four).

See the Overview for an example of a substitution of words for specified purposes.

See Applying partially in force amendments which are then brought further into force over time for more details about substitutions that are brought further into force over time where text may need to be retained.

Carrying out the substitution of a provision or sub-provision in XMetaL

If your substitution involves unequal substitution of whole provisions, you should follow the instructions in Higher Level Substitutions, as you will need to have checked out the parent level of the provision.

The amendment of the data is carried out in XMetaL and the instructions that follow assume that you have checked out the relevant provision that is to be amended, that you have set up your XMetaL workspace, and that you are now ready to carry out the amendment. For guidance on the steps required to reach this point, see Starting Update Tasks.

Step One In the amended provision window: Check if there are any annotation references relating to the provision or sub-provision to be substituted appearing in front of the provision number and if so, check if the annotation reference is for a textual amendment (F-note), a non-textual amendment (C-note), or contains the commencement information (I-note): C-notes: When a whole provision or sub-provision is substituted, the existing C-notes do not necessarily become redundant. If the affecting legislation giving rise to the C-note has been repealed or revoked then they should be removed. F-notes and I-notes: Where they are present, these will usually need removing if the provision is being substituted after it has come into force. Before removing any annotation references, read the annotations first to ensure they will no longer apply after the substitution is completed. If in doubt about removing annotation references, seek advice from a Review Editor. Example of a C-note that can be removed 1993 c. 43, s. 6(1A) is substituted (31.1.2022 at 11.00 p.m.) by The Railway (Licensing of Railway Undertakings) (Amendment) Regulations 2021 (S.I. 2021/1105), regs. 1(3), 10(2)(a): https://www.legislation.gov.uk/ukpga/1993/43/section/6 At the previous point in time, s. 6(1A) had a C-note attached to it as follows: https://www.legislation.gov.uk/ukpga/1993/43/section/6/2021-02-11 S. 6(1A) modified (31.12.2020) by The Railway (Licensing of Railway Undertakings) (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/700), regs. 1(2), 41; 2020 c. 1, Sch. 5 para. 1(1) S.I. 2019/700, reg. 41 modifies s. 6(1A) so that “a railway undertaking licence granted pursuant to the 2005 Regulations includes a reference to, or applies to, a relevant European licence”: https://www.legislation.gov.uk/uksi/2019/700/regulation/41 The C-note was removed when we substituted s. 6(1A), because the new s. 6(1A) together with the change to s. 6(2) provides textually for the inclusion of a relevant European licence. Also, the modification in S.I. 2019/700, reg. 41 lasted only “For the period of 2 years beginning with exit day” and as exit day was 31.1.2020 at 11 pm, the modification expired on 31.1.2022 at 11 pm (the precise time of the substitution of s. 6(1A)). See Scenarios below for further examples of C-notes that can be removed and also C-notes that need to be left in place when provisions or sub-provisions are substituted. In the amending provision window: Read what the amendment is and where in the amended provision it is to be made. Note on headings: If the provision heading is also substituted as part of the substitution, this will need to be done separately. First carry out the substitution for the provision and then substitute the new heading for the old in the `ukl:title` tags (you can copy and paste). You will then need to drag the opening `ukl:Substitution` tag to the beginning of the heading (see example). If you are carrying out a limited extent or retained text substitution, you will also need to carry out the amendment separately for the heading using the same task (however this time you will need to do a limited or retained text substitution of words in the old heading for the new) and the provision. The old and new heading text should then be displayed side by side after you have carried out the relevant amendment (see example). Select the appropriate `<ukl:P#para>` tag to highlight and copy the provision/sub-provision to be substituted: Provision: `<ukl:P1para>` Sub-Provision: `<ukl:P2para>` Sub-sub-provision: `<ukl:P3para>` Note: ensure all the text including punctuation within the `<ukl:P#para>` tags is highlighted BUT NOT the provision number (enclosed in `<ukl:Pnumber>` tags): You can right-click and copy or use the standard ‘edit’ and ‘copy’ menu options from the menu bar. In the amended provision, highlight the relevant `<ukl:P1para>`, `<ukl:P2para>` or `<ukl:P3para>` tag for the provision or sub-provision that is to be substituted. Single click on the task to highlight it in the Resource Manager window. Your next action will be determined by whether the amendment covers the whole extent and is wholly in force or is for a limited extent, or whether it needs to be a retained text substitution (e.g. In Force Date Qualification 'for specified purposes'), consequently Step Two is described separately for each of these scenarios.

Whole substitution

Step Two - whole extent and wholly in force substitution of a sub-provision On the menu bar at the top of the page select Legislation - Textual Amendments - Substitution. This will: Automatically substitute the provision/sub-provision, bracketed by opening `<ukl:Substitution>` and closing `</ukl:Substitution>` tags in the amended provision. Automatically insert the annotation for this amendment at the end of the amended provision, e.g. S. 5(3) substituted (1.3.2004) by Health and Education Act 2003 (c. 90), s. 130, Sch. 18 para. 8 Generate a green tick next to the task in the Resource Manager window to show that it has been completed. Once the amendment has been made, the cursor will be situated at the point the automatic annotation was inserted in the amended provision window. Your next task will be to check the amendment in XMetaL (Step Three), followed by the final task of previewing the amendment from the Update Details page (Step Four).

Limited extent substitution

For limited extent whole provision substitutions, it may not be possible to carry out a limited extent amendment without creating concurrent versions. You should follow the guidance on the Limited Extent amendments page on deciding whether to create a concurrent version.

If you do need to carry out a limited extent substitution of a whole provision and you are not creating a concurrent version, it is possible to do a limited extent substitution of <ukl:P1para> tags and display both versions within the same provision, see an example here:

https://www.legislation.gov.uk/ukpga/1985/50/section/1/2023-02-06

WARNING: You should not try to substitute at `<ukl:P1>` or `<ukl:P1group>` tagging levels because this is the level that contains the identifiers and other attributes. You should also not attempt to create multiple versions of a whole provision, by inserting the substituted version as a new provision, as this will cause update errors.

For a limited extent substitution of a sub-provision that doesn't require the creation of a concurrent version, you can carry out a limited extent substitution having selected the relevant <ukl:P2> or <ukl:P3> tagging (as described in Step One above, although note this is slightly different to the description in Step One where <ukl:P#para> tags are selected for whole extent and wholly in force substitutions of sub-provisions. Note that if you were to carry out a limited extent sub-provision substitution on the <ukl:P#para> tags, you would also need to create the <ukl:P#> tagging for the substituted version after carrying out the substitution).

Once you have selected the relevant <ukl:P2> or <ukl:P3> tagging and copied it, proceed as follows:

Step Two - limited extent substitution of a sub-provision On the menu bar at the top of the page select Legislation - Textual Amendments - Limited Extent Substitution. In the pop-up 'XMetaL Author Essential', check the Extent entered is correct and click OK, e.g.: The Editorial System will automatically retain the existing `<ukl:P2>` or `<ukl:P3>` tagging, surrounded by opening `<Repeal>` and closing `</Repeal>` tags containing the opening and closing square brackets for the retained text, and insert after this the substituted `<ukl:P2>` or `<ukl:P3>` tagging, surrounded by by opening `<Addition>` and closing `</Addition>` tags containing the opening and closing square brackets for the substituted version of the sub-provision, for example: The Editorial System will also automatically insert the annotation for this amendment at the end of the amended provision, including the limited extent in brackets after the effect and generate a green tick next to the task in the Resource Manager window to show that it has been completed. Once the amendment has been made, the cursor will be situated at the point the annotation was inserted in the amended provision window and you will need to scroll back up to the newly substituted sub-provision. If the option to carry out the substitution on the `<ukl:P2>` or `<ukl:P3>` tagging is not available to you, you will need to select the `<ukl:P2para>` or `<ukl:P3para>` tagging, carry out the substitution as described above, and then you will need to amend the tagging so that the substituted version of the sub-provision gets its own `<ukl:P2>` or `<ukl:P3>` and `<ukl:Pnumber>` tagging: 1. Use the Element List to insert the relevant `<ukl:P2>` or `<ukl:P3>` tagging after the closing `</ukl:P2>` or `</ukl:P3>` tag of the substituted sub-provision: 2. Type the relevant sub-provision number into the empty brackets inside the `<ukl:Pnumber>` tagging: 3. Select the substituted text by selecting the relevant `<ukl:P2para>` or `<ukl:P3para>` tagging: 4. Drag this into the new `<ukl:P2>` or `<ukl:P3>` tagging you have created, and place it after the `<ukl:Pnumber>` tagging: 5. You now need to move the opening square brackets for both the retained and substituted versions of the sub-provision by firstly selecting and dragging the `<ukl:Repeal>` tagging containing the opening square bracket and placing it before the sub-provision number of the retained sub-provision. From this: To this: Now do the same for the substituted version by selecting and dragging the `<ukl:Addition>` tagging containing the opening square bracket and placing it before the sub-provision number of the substituted version to end up with this: Whichever way you carry out the sub-provision substitution, once you have finished carrying out the amendment and you preview your amendment, there should be two versions of the sub-provision, each with its own set of square brackets and the same F-note reference: The annotation should read, for example: Reg. 33(1) substituted (E.W.S.) (9.2.2009) by Local Transport Act 2008 (c. 26), s. 134(4), Sch. 4 para. 59(2); S.I. 2009/107, art. 2(1), Sch. 1 Pt. 1 Your next task will be to check the amendment in XMetaL (Step Three), followed by the final task of previewing the amendment from the Update Details page (Step Four).

See the Overview for an example of a limited extent substitution of a sub-provision and further reading on limited extent amendments can be found here.

Retained text substitution

If your amendment has only been brought into force for specified purposes, you may need to carry out a retained text substitution to make sure that the existing provision/sub-provision is retained alongside the newly substituted provision/sub-provision; however this is not always straightforward and may not always be possible, so check with a Review Editor if you are not sure. For further guidance on retaining text for partially in force amendments see Applying partially in force amendments which are then brought further into force over time - Partially in force amendments.

See an example of a retained text whole provision substitution here: https://www.legislation.gov.uk/uksi/2010/2214/regulation/23/2013-01-09.

For a retained text substitution of a sub-provision, you can carry out a retained text substitution having selected the relevant <ukl:P2> or <ukl:P3> tagging (as described in Step One above, although note this is slightly different to the description in Step One where <ukl:P#para> tags are selected for whole extent and wholly in force substitutions of sub-provisions. Note that if you were to carry out a limited extent sub-provision substitution on the <ukl:P#para> tags, you would also need to create the <ukl:P#> tagging for the substituted version after carrying out the substitution).

Step Two - retained text substitution of a sub-provision On the menu bar at the top of the page click Legislation - Textual Amendments - Substitution Retain Text. The Editorial System will automatically retain the existing `<ukl:P2>` or `<ukl:P3>` tagging, surrounded by opening `<Repeal>` and closing `</Repeal>` tags containing the opening and closing square brackets for the retained text, and insert after this the substituted `<ukl:P2>` or `<ukl:P3>` tagging, surrounded by by opening `<Addition>` and closing `</Addition>` tags containing the opening and closing square brackets for the substituted version of the sub-provision, for example: The Editorial System will also automatically insert the annotation for this amendment at the end of the amended provision and generate a green tick next to the task in the Resource Manager window to show that it has been completed. Once the amendment has been made, the cursor will be situated at the point the annotation was inserted in the amended provision window and you will need to scroll back up to the newly substituted sub-provision. There are now two versions of the sub-provision when you preview your amendment, each with its own set of square brackets and F-note reference: The annotation should read, for example: Sch. 8 para. 33(1) substituted (31.1.2017 for specified purposes) by Policing and Crime Act 2017 (c. 3), ss. 163(3), 183(1)(5)(e) Once the amendment has been made, the cursor will be situated at the point the automatic annotation was inserted in the amended provision window. Your next task will be to check the amendment in XMetaL (Step Three), followed by the final task of previewing the amendment from the Update Details page (Step Four).

Check the amendment in XMetaL

Step Three Whilst still in XMetaL, you need to check that the amendment has been carried out correctly and that the annotation is accurate and complete by carrying out all the checks detailed in the Update Editor Checklist. Remember to move the opening square bracket if you substituted a provision or a sub-provision. If you substituted a whole provision, the opening bracket for the substitution will automatically be positioned within the `ukl:Pnumber` tag before the first sub-provision number inside the `ukl:P1para` tagging. You need to adjust the position of the opening bracket to include the provision number by moving (by clicking on the tag and dragging it) the opening `ukl:Substitution` tag to just before the provision number within the `ukl:Pnumber` of the provision. If your substitution also included the provision heading, you need to adjust the position of the opening bracket to include that, e.g. Original location of `ukl:Substitution` tag: Tag is moved to beginning of `ukl:Title` tag so that the whole amendment will be contained within brackets: Similarly, if you substituted a sub-provision, the opening bracket for the substitution will automatically be positioned just inside the first `ukl:Text` tag of the `ukl:P2para` or `ukl:P3para` tagging that you selected. You need to adjust the position of the opening bracket to include the sub-provision number by moving (by clicking on the tag and dragging it) the opening `ukl:Substitution` tag to just before the sub-provision number within the relevant `ukl:Pnumber` tag. Don't forget to make sure that you remove any tagging that is not required in the amendment text and that you have have set the ConfersPower attribute to "true" for any power-conferring provisions. Remember to check that the extent of your substituted provision is correct. If the RestrictExtent attribute is blank, the provision will inherit the extent of the parent into which it has been substituted so you need to check that this is correct. See more on the RestrictExtent Attribute. Once you are satisfied that the amendment is correct and complete, select Legislation - Check In on the menu bar at the top of the page: Click OK in the pop-up Close the amending provision window and go back to the Editorial Site to check the amendment in Step Four (leaving XMetaL open if you have more update to do after this amendment).

Preview the amendment from the Update Details page

Step Four Return to the Update Details page and refresh the page by pressing `CTRL` and `F5`. The Edit Status should change to Edit Complete. If there was anything unusual about the amendment that you need to draw to the attention of the review editor, you can add a note by clicking on the note icon to the right of the edit status. View your amendment by selecting the Newly Edited Version tab (to see the provision text and a summary of the provision attributes) or the Preview Legislation button (to see a website Preview of the provision). Tip: If you need to check any of the attributes of the provision you have amended, this can easily be done by selecting the Newly Edited Version tab where you will see the relevant attributes of your provision listed. Carry out all the checks detailed in the Update Editor Checklist, to make sure that the amendment is accurate and complete. If you need to make any corrections to the amendment, check the provision back out and make any changes as necessary in XMetaL before checking the provision back in and previewing the provision again. Note that if you only need to correct an annotation, you can click on the Edit button to the right of the annotation in Preview to edit it without having to check the provision out again in XMetaL, but beware of the bugs you may encounter when using the annotation Edit function in preview. Once you have finished checking the amendment on the Editorial Site, the update task will be complete and you can move on to your next update task.

SCENARIOS

Related reading: Approach to Update - Some Basic Rules and Exceptions, Specific Update Issues

Unequal substitution of sub-provisions

If your substitution involves unequal substitution of whole provisions, you should follow the instructions on the Higher Level Substitutions page, as you will need to have checked out the parent level of the provision.

More for less

More for less sub-provision substitutions occur when the substitution results in more sub-provisions than there were previously, such as new sub-provisions (a)-(c) in place of the existing (a) sub-provision.

To carry out this type of amendment, substitute the existing sub-provision in the amended provision with the new version from the amending provision. Then, copy and paste the new subs-provisions from the amending provision after the newly substituted sub-provision in the amended provision. Finally, in the amended sub-provision select the closing </ukl:Substitution> tag which sits before the closing <ukl:text> tag and cut and paste (or drag) it so it sits just before the closing </ukl:text> tag of the last new sub-provision.

Less for more

Less for more sub-provision substitutions occur when the substitution results in fewer sub-provisions than there were previously, such as a new sub-provision (a) substituted in place of the amended provision’s existing (a)-(c) sub-provisions.

To carry out this type of amendment, substitute in the new sub-provision which has the same number/letter as the existing sub-provision. Then, for the sub-provision(s) which are to be substituted out, delete the sub-provision <ukl:P2>, <ukl:P3> or <ukl:P4> tagging (which will completely remove the sub-provision(s)).

Note: This method differs from the whole provision level 'less for more' substitution method, which repeals the provisions to be substituted out, leaving the provision number and a dotted line.

Example of a less for more substitution of a sub-provision

Amendment: 2004 c. 33, Sch. 2 para. 15(1)(c) substituted for Sch. 2 para. 15(1)(b)(c) by 2013 c. 2, Sch. 11 para. 168(2)(b)

Instructions: Carry out substitution of para. 15(1)(c) and then delete the <P3> tagging for para. 15(1)(b) so that sub-paragraph (b) is completely removed.

Result: See 2004 c. 33, Sch. 2 para. 15(1)

Sub-provisions substituted for words

Amendment: 2008 c. 17, s. 178(3)(a)(b) substituted for words by 2011 c. 20, Sch. 19 para. 54

Instructions: In XMetaL, using the Element List, two sets of empty ukl:P3 tagging, i.e.

ukl:P3
ukl:Pnumber
/ukl:Pnumber
ukl:P3para
ukl:Text
/ukl:Text
/ukl:P3para
/ukl:P3

were inserted within the existing ukl:P2 tagging of s. 178(3) and the text for these sub-provisions was copied from the amending provision into the empty ukl:Text tagging for sub-paragraphs (a) and (b). To generate the square brackets and the annotation for this amendment, the words "to the HCA." were substituted with the em dash from the amending provision using the relevant substitution task in the Resource Manager. The closing square bracket was then moved to the end of the text in sub-paragraph (b).

Before:

After:

Result: See 2008 c. 17, s. 178

Removing or keeping existing annotation references when a provision or sub-provision gets substituted

Removal of an existing C-note when a sub-provision gets substituted

On 21/3/2024, 2004 c. 30, s. 1(12) gets substituted by S.I. 2024/221, reg. 3:

S. 1(12)(a) substituted (21.3.2024) by The Medical Devices (In Vitro Diagnostic Devices etc.) (Amendment) Regulations 2024 (S.I. 2024/221), regs. 1(2), 3

There is an existing C-note in s. 1, for the modification of s. 1(12)(a) on 31/12/2020 by S.I. 2002/618, reg. 4T(1) (as inserted by The Medical Devices (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/791), regs. 1(1), 3(7) (as amended by S.I. 2020/1478, regs. 1(3), Sch. 2 para. 2); 2020 c. 1, Sch. 5 para. 1(1)):

https://www.legislation.gov.uk/ukpga/2004/30/section/1/2020-12-31#section-1-12-a

But reg. 4T(1) is also omitted (21.3.2024) by S.I. 2024/221 reg. 13, so the C-note is not needed anymore and is therefore removed when the substitution is carried out:

https://www.legislation.gov.uk/ukpga/2004/30/section/1/2024-03-21#section-1-12-a

Leaving an existing C-note in place when a provision gets substituted

On 4/3/2024, 2006 c. 46 gets fully substituted by 2023 c. 56, s. 28(3):

S. 86 substituted (26.10.2023 for specified purposes, 4.3.2024 in so far as not already in force) by Economic Crime and Corporate Transparency Act 2023 (c. 56), ss. 28(3), 219(1)(2)(b); S.I. 2024/269, reg. 2(v)

https://www.legislation.gov.uk/ukpga/2006/46/section/86/2024-03-04

There are two existing notes in s. 86, both of which remain in force (one of which itself gets amended on 4/3/2024):

https://www.legislation.gov.uk/uksi/2009/1804/regulation/16/2024-03-04

https://www.legislation.gov.uk/uksi/2009/2436/schedule/1/paragraph/5

The C-notes were therefore left in place when the substitution of s. 86 was carried out.

RELATED PAGES

Approach, errors and troubleshooting:

Difference between revisions of "Editorial Update/Textual Amendments/Substitutions/Provision Level Substitutions"

Latest revision as of 06:49, 25 April 2025

Contents

OVERVIEW

Substitution of words

Whole extent - wholly in force

Whole extent - partially in force

Limited extent - wholly in force

Substitution of a provision or sub-provision

Whole extent - wholly in force

Whole extent - partially in force

Limited extent - wholly in force

IN MORE DETAIL

Important considerations

Limited extent amendments

Partially in force amendments

Update process

Things to remember

Carrying out a substitution of words in XMetaL

Whole substitution

Limited extent substitution

Retained text substitution

Carrying out the substitution of a provision or sub-provision in XMetaL

Whole substitution

Limited extent substitution

Retained text substitution

Check the amendment in XMetaL

Preview the amendment from the Update Details page

SCENARIOS

Unequal substitution of sub-provisions

More for less

Less for more

Sub-provisions substituted for words

Removing or keeping existing annotation references when a provision or sub-provision gets substituted

Removal of an existing C-note when a sub-provision gets substituted

Leaving an existing C-note in place when a provision gets substituted

RELATED PAGES

Navigation menu

Search

@@ Line 9: / Line 9: @@
 https://www.legislation.gov.uk/uksi/2020/1045/regulation/3/2021-03-29
-  [[File:Provision_Level_Substitutions_1.png]]
+  [[File:Provision_Level_Substitutions_1a.png]]
-  [[File:Provision_Level_Substitutions_2.png]]
+  [[File:Provision_Level_Substitutions_2a.png]]
 {| class="wikitable" style="margin-left: auto; margin-right: 0px;"
@@ Line 57: / Line 57: @@
 ====Whole extent - partially in force====
+Whole provision substituted for specified purposes:
 https://www.legislation.gov.uk/uksi/2010/2214/regulation/23/2013-01-09
   [[File:Provision_Level_Substitutions_3.png]]
+Sub-provisions substituted for specified purposes:
+ [[File:Multiple subprov subs spec purp1.png|900px]]
+ S. 80(1)(2) substituted (26.10.2023 for specified purposes) by Economic Crime and Corporate Transparency Act 2023 (c. 56), ss. 21(1), 219(1)(2)(b)
 {| class="wikitable" style="margin-left: auto; margin-right: 0px;"
-|[[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Carrying_out_the_substitution_of_a_provision_or_sub-provision_in_XMetaL | How to carry out the substitution of a provision or sub-provision]]|}
+|[[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Carrying_out_the_substitution_of_a_provision_or_sub-provision_in_XMetaL | How to carry out the substitution of a provision or sub-provision]]
+|}
 ====Limited extent - wholly in force====
@@ Line 73: / Line 83: @@
   S. 33(3) substituted (E.W.) (9.2.2009) by Local Transport Act 2008 (c. 26), s. 134(4), Sch. 4 para. 59(2); S.I. 2009/107, art. 2(1), Sch. 1 Pt. 1
-<strong>Note:</strong> For limited extent whole provision substitutions, it may not be possible to carry out a limited extent amendment without creating concurrent versions. Speak to a <strong>Review Editor</strong> for advice in this situation.
+<strong>Note:</strong> For [[Editorial_Update/Limited_Extent_Amendments#Is_your_amendment_a_limited_extent_substitution_of_a_whole_provision.3F|limited extent whole provision substitutions]], it may not be possible to carry out a limited extent amendment without creating [[Editorial_Update/Limited_Extent_Amendments#Concurrent_Versions|concurrent versions]]. Speak to a <strong>Review Editor</strong> for advice in this situation.
 <!--See an example of a limited extent whole provision substitution that has been carried out without creating concurrent versions here: https://www.legislation.gov.uk/ukpga/2006/32/section/79.-->
@@ Line 83: / Line 93: @@
 {| class="wikitable"
-|<strong>Related reading:</strong> [[Editorial_Update/Approach_to_Update_-_Some_Basic_Rules_and_Exceptions|Approach to Update - Some Basic Rules and Exceptions]], [[Editorial_Update/Limited_Extent_Amendments|
+|<strong>Related reading:</strong> [[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#APPROACH_TO_UPDATE_-_SOME_BASIC_RULES_AND_EXCEPTIONS|Approach to Update - Some Basic Rules and Exceptions]], [[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#SPECIFIC_UPDATE_ISSUES|Specific Update Issues]], [[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#UPDATE_TROUBLESHOOTING|Update Troubleshooting]],  [[Editorial_Update/Limited_Extent_Amendments|
-Limited extent amendments]], [[Editorial_Update/Applying_partially_in_force_amendments_which_are_then_brought_further_into_force_over_time | Applying partially in force amendments which are then brought further into force over time]]
+Limited extent amendments]], [[Editorial_Update/Applying_partially_in_force_amendments_which_are_then_brought_further_into_force_over_time | Applying partially in force amendments which are then brought further into force over time]], [[Editorial_Update/Update_Editor_Checklist|Update Editor Checklist]]
 |}
-===Carrying out a substitution of words in XMetaL===
+===Important considerations===
+Before you commit yourself to carrying out your amendment, make sure that you have considered all the factors that will influence how you carry it out.
+The [[Effects_Spreadsheet|effects spreadsheet]] that you  [[Editorial_Update/Starting_Update_Tasks#Downloading_the_Effects_Spreadsheet|download at the start of the update task]] contains all the information that was recorded for the effect you are applying. You should [[Editorial_Update/Update_Editor_Checklist#Check_the_TOES_data_for_your_amendment|check the TOES data for your amendment]] before you start. In particular, check the [[Effects_Spreadsheet#Comments_for_Editor|Comments for Editor]] to see if there is anything unusual about the effect that you need to be aware of, or if the amendment text contains power. Also look at the commencement details of the affecting document and look at the affecting provision itself.
+Questions to consider:
+<blockquote>Is the effect wholly in force or partially in force? Is it whole or [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Limited_Extent_Amendments|limited extent]]? Has your affecting provision itself been amended by an [[Editorial_Update/Amendment_to_Earlier_Affecting_Provision|amendment to earlier affecting provision]] effect? Is there an [[Effects_Spreadsheet#Appended_Commentary|appended commentary]] for the effect? Is your effect a knock-on effect? Does your substituted text [[Editorial_Update/XMetaL_and_XML_tagging#ConfersPower_Attribute|contain power]]? Are there any savings or transitional provisions?</blockquote>
+The answers to these questions will inform how you carry out the amendment, whether you need to amend any of the [[Editorial_Update/XMetaL_and_XML_tagging#Attribute_Inspector|attributes]] of the provision you are amending, also what the [[Editorial_Update/Annotation_Conventions|annotation]] that the Editorial System generates will look like and whether there are any amendments you might need to make to this annotation.
+Use the [[Editorial_Update/Update_Editor_Checklist#Check_the_TOES_data_for_your_amendment|Update Editor Checklist]] to make sure that you have researched everything you need to before you carry out your amendment and refer back to it throughout the task, particularly when you [[Editorial_Update/Update_Editor_Checklist#XMetaL:_making_sure_that_the_amendment_is_applied_correctly|check the amendment in XMetaL]] and [[Editorial_Update/Update_Editor_Checklist#Preview:_double_check_the_point_in_time_.28PiT.29.2C_amendment_and_annotation_before_moving_on|preview your amendment]].
+The following pages also give useful guidance that will help if you are not sure how carry out your amendment:
+*[[Editorial_Update/Annotation_Conventions | Annotation Conventions]]
+*[[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#APPROACH_TO_UPDATE_-_SOME_BASIC_RULES_AND_EXCEPTIONS|Approach to Update - Some Basic Rules and Exceptions]]
+*[[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#SPECIFIC_UPDATE_ISSUES|Specific Update Issues]]
+====Limited extent amendments====
+The Editorial System flags possible limited extent amendments with the following message:
+[[File: Limited_extent_warning_message_2.png|900px]]
-<Strong>Note:</strong> These instructions assume you have checked out the relevant provision that is to be amended, that you have set up your [[Editorial_Update/Starting_Update_Tasks#Setting_up_your_XMetaL_workspace|XMetaL workspace]], and that you are now ready to carry out the amendment.  For guidance on the steps required to reach this point, see [[Editorial_Update/Starting_Update_Tasks|Starting Update Tasks]].
+The extent of the affected and affecting provision is highlighted in red. You can also view the extent/TA in the effects spreadsheet that [[Editorial_Update/Starting_Update_Tasks#Downloading_the_Effects_Spreadsheet|can be downloaded from the Starting Update Page]].
+To decide whether or not you need to [[Editorial_Update/Limited_Extent_Amendments#Limited_extent_amendment_options_in_XMetaL|carry out your amendment using the limited extent amendment option in XMetaL]], follow the decision-making process described in the [[Editorial_Update/Limited_Extent_Amendments#Decision_tree_for_deciding_what_is_a_limited_extent_amendment|Decision tree for deciding what is a limited extent amendment]] on the [[Editorial_Update/Limited_Extent_Amendments|Limited Extent Amendments]] page, where you <strong>may</strong> also need to [[Editorial_Update/Limited_Extent_Amendments#Decision_tree_for_deciding_whether_or_not_to_create_concurrent_versions_for_a_limited_extent_amendment|consider creating a concurrent version]] of the provision (and subsequently carrying out the amendment fully in the relevant version of the provision).
+You may find that your amendment has already been carried out as a limited extent amendment for another jurisdiction, in which case you will need to follow the guidance on  [[Editorial_Update/Limited_Extent_Amendments#Updating_an_existing_limited_extent_amendment_when_an_identical_amendment_is_applied_for_another_jurisdiction|Updating an existing limited extent amendment when an identical amendment is applied for another jurisdiction]].
+If, after making all the considerations outlined above, you decide that the amendment is indeed a limited extent amendment, when you get to Step Two, follow the method outlined in Step Two – limited extent (the other steps remain the same).
+====Partially in force amendments====
+Amendments are not always brought wholly into force at once, frequently they are brought into force gradually over two or more points in time (PiTs). This is described in more detail in the section on  [[Editorial_Update/Applying_partially_in_force_amendments_which_are_then_brought_further_into_force_over_time#Partially_in_force_amendments|Partially in force amendments]] on the [[Editorial_Update/Applying_partially_in_force_amendments_which_are_then_brought_further_into_force_over_time|Applying partially in force amendments which are then brought further into force over time]] page.
+If a substitution has been brought into force for specified purposes only, the commencement “for specified purposes” will get added after the in force date when the annotation is generated, and the existing text may need to be retained alongside the substituted text.
+Before deciding whether to retain text for an amendment that is only partially in force, you should consider the nature of your update task and whether the [[Editorial_Update/Applying_partially_in_force_amendments_which_are_then_brought_further_into_force_over_time#Update_is_.E2.80.9Cbringing_the_legislation_up_to_date.E2.80.9D_and_we_know_the_amendment_will_come_fully_into_force_at_a_later_Point_in_Time|amendment will come fully into force during the course of your update task]]. See [[Editorial_Update/Applying_partially_in_force_amendments_which_are_then_brought_further_into_force_over_time | Applying partially in force amendments which are then brought further into force over time]], and in particular [[Editorial_Update/Applying_partially_in_force_amendments_which_are_then_brought_further_into_force_over_time#What_happens_when_an_amendment_comes_further.2C_or_fully_into_force.3F|What happens when an amendment comes further, or fully into force?]], for more details about retained text repeals that are brought into force over time.
+See the examples in the Overview: [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Whole_extent_-_partially_in_force|Substitution of words - whole extent - partially in force]] and [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Whole_extent_-_partially_in_force_2|Substitution of a provision - whole extent - partially in force]].
+===Update process===
+In these instructions, the update process has been broken down into four steps, Steps 1-3 are carried out in XMetaL and Step 4 on the Editorial site after check-in. Steps 1 and 2 are explained separately for substitutions of words and sub-provisions (and Step 2 is further subdivided into whole extent (wholly in force or partially in force), limited extent retained text amendments). The checks made in Steps 3 and 4 are the same, whichever route you take to get there.
+Carrying out and checking the amendment in XMetaL:
+ Step One - preparing to carry out the amendment in XMetaL
+ Step Two - selecting the correct XMetaL Legislation menu option to carry out the amendment
+ Step Three - checking the amendment in XMetaL
+Checking the amendment in the Editorial System:
+ Step Four - preview the amendment from the Update Details page
+====Things to remember====
+The <strong>[[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#SPECIFIC_UPDATE_ISSUES|Specific Update Issues]]</strong> guidance includes some <strong>[[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#Editorial_Update_-_some_general_reminders|general Editorial Update reminders]]</strong> to be aware of before you carry out your amendment. Also included is information on <strong>[[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#Presentation_of_Revised_Legislation|how amendments are presented]]</strong>. Note, in particular, there may be <strong>[[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#.E2.80.98Tidying_up.E2.80.99_amendment_text:_fixing_incorrectly_tagged_amending_provisions_and_removing_unwanted_tagging|tagging that may need to be removed from amendment text]]</strong>, to prevent formatting errors.
+See also the advice on how to [[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#Approach_to_.E2.80.98awkward.E2.80.99_amendments|approach more unusual types of amendment]], and [[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#APPROACH_TO_UPDATE_-_SOME_BASIC_RULES_AND_EXCEPTIONS|Approach to Update - Some Basic Rules and Exceptions]].
+====Carrying out a substitution of words in XMetaL====
+The amendment of the data is carried out in XMetaL and the instructions that follow assume that you have checked out the relevant provision that is to be amended, that you have set up your [[Editorial_Update/Starting_Update_Tasks#Setting_up_your_XMetaL_workspace|XMetaL workspace]], and that you are now ready to carry out the amendment.  For guidance on the steps required to reach this point, see [[Editorial_Update/Starting_Update_Tasks|Starting Update Tasks]].
+<strong>Notes:</strong>
+*When you are substituting words, any commentary reference included in the existing text you highlight will be removed automatically when the text is substituted, and if this commentary reference relates to a single annotation then that annotation will also be removed automatically on check-in.
+*Occasionally there may be multiple substitutions of the same words throughout a provision.  As long as the same task in the <strong>Resource Manager</strong> window is highlighted on each occasion, it is possible to carry out the same substitution of words and generate the same commentary reference (linking to the same annotation) each time, without any unnecessary new footnote references or annotations also being created.
 {| class="wikitable" style="background-color:#f2f2f2;"
@@ Line 103: / Line 183: @@
 <li>In the <strong>Resource Manager</strong> window single click on the task to highlight it.</li>
 <br>
-<li>Your next action will be determined by whether the amendment covers the [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#tna-wholesubswords|whole extent and is wholly in force]] or is for a [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#tna-lesubswords|limited extent]], or whether it needs to be a [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#tna-spsubswords|retained text substitution]] (e.g. In Force Date Qualification 'for specified purposes'), consequently Step Two is described separately for each of these scenarios.</li></ol>
+<li>Your next action will be determined by whether the amendment covers the [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#tna-wholesubswords|whole extent and is wholly in force]] or is for a [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#tna-lesubswords|limited extent]], or whether it needs to be a [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#tna-spsubswords|retained text substitution]] (e.g. In Force Date Qualification ‘for specified purposes’ or type of effect ‘substituted for specified purposes’), consequently Step Two is described separately for each of these scenarios.</li></ol>
 |}
 <div id="tna-wholesubswords"></div>
-====Whole substitution====
+=====Whole substitution=====
 {| class="wikitable" style="background-color:#f2f2f2;"
@@ Line 121: / Line 201: @@
 Once the amendment has been made, the cursor will be situated at the point the automatic annotation was inserted in the <strong>amended provision</strong> window.
-Your next task will be to [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_in_XMetaL | check the amendment in XMetaL (Step Three)]], followed by the final task of [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_on_the_Editorial_Site | checking the amendment on the Editorial Site (Step Four)]].
+Your next task will be to [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Check_the_amendment_in_XMetaL | check the amendment in XMetaL (Step Three)]], followed by the final task of [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Preview_the_amendment_from_the_Update_Details_page | previewing the amendment from the Update Details page (Step Four)]].
 |}
 <div id="tna-lesubswords"></div>
-====Limited extent substitution====
+=====Limited extent substitution=====
 {| class="wikitable" style="background-color:#f2f2f2;"
@@ Line 135: / Line 216: @@
 *In the <strong>amended provision</strong>, retain the existing word or words, bracketed by opening <code><repeal></code> and closing <code></repeal></code> tags, and next to this insert the new word or words, bracketed by opening <code><addition></code> and closing <code></addition></code> tags.
 *Automatically insert the annotation for this amendment at the end of the <strong>amended provision</strong>, including the <strong>limited extent</strong> in brackets after the effect, e.g.
-  Words in Sch. 1 para. 6 substituted <span style = "color:red;"(E.W.)</span> (1.1.2017) by The Environmental Permitting (England and Wales) Regulations 2016 (S.I. 2016/1154), reg. 1(1), Sch. 29 Pt. 1 para. 20(b) (with regs. 1(3), 77-79, Sch. 4)
+  Words in Sch. 1 para. 6 substituted <span style = "color:red;">(E.W.)</span> (1.1.2017) by The Environmental Permitting (England and Wales) Regulations 2016 (S.I. 2016/1154), reg. 1(1), Sch. 29 Pt. 1 para. 20(b) (with regs. 1(3), 77-79, Sch. 4)
 *Generate a green tick next to the task in the <strong>Resource Manager</strong> window to show that it has been completed.
@@ Line 141: / Line 222: @@
 Once the amendment has been made, the cursor will be situated at the point the automatic annotation was inserted in the <strong>amended provision</strong> window.
-Your next task will be to [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_in_XMetaL | check the amendment in XMetaL (Step Three)]], followed by the final task of [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_on_the_Editorial_Site | checking the amendment on the Editorial Site (Step Four)]].
+Your next task will be to [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Check_the_amendment_in_XMetaL | check the amendment in XMetaL (Step Three)]], followed by the final task of [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Preview_the_amendment_from_the_Update_Details_page | previewing the amendment from the Update Details page (Step Four)]].
 |}
-See the Overview for an [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Limited_extent | example]] of a limited extent substitution of words. Further reading on limited extent amendments can be found [[Editorial_Update/Limited_Extent_Amendments|here]].
+See the Overview for an [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Limited_extent_-_wholly_in_force | example]] of a limited extent substitution of words. Further reading on limited extent amendments can be found [[Editorial_Update/Limited_Extent_Amendments|here]].
 {|class="wikitable" style="border-left:solid 2px red;border-right:solid 2px red;border-top:solid 2px red;border-bottom:solid 2px red; background-color:#e6f2ff;
 |-
-|<strong>WARNING:</strong> There is a bug in the limited extent amendment code that means that amendments to headings results in false E-notes being created - look out for this and remove any false [[Editorial_Update/Annotation_Conventions#E-notes_.28Extent_information.29|E-notes]].
+|<strong>WARNING:</strong> There is a bug in the limited extent amendment code that means that limited extent amendments to headings results in false E-notes being created - look out for this and remove any false [[Editorial_Update/Annotation_Conventions#E-notes_.28Extent_information.29|E-notes]].
 |}
@@ Line 155: / Line 235: @@
 <div id="tna-spsubswords"></div>
-====Retained text substitution====
+=====Retained text substitution=====
-If your amendment is not ‘wholly in force’ and has a different type of <strong>In Force Date Qualification</strong>, e.g. ‘for specified purposes’, or the effect itself is qualified in some way e.g. ‘substituted for specified purposes’, you may need to carry out a <strong>retained text</strong> substitution to make sure that the existing word or words are retained alongside the newly substituted word or words.
+If your amendment has only been [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Partially_in_force_amendments|brought into force for specified purposes]], you may need to carry out a <strong>retained text</strong> substitution to make sure that the existing word or words are retained alongside the newly substituted word or words.
 For further guidance on retaining text for partially in force amendments see [[Editorial_Update/Applying_partially_in_force_amendments_which_are_then_brought_further_into_force_over_time#Partially_in_force_amendments | partially in force amendments]]. Check with a <strong>Review Editor</strong> if the amendment is not straightforward and you are not sure whether to retain text or not.
@@ Line 167: / Line 247: @@
 *Retain the existing word or words, bracketed by opening <code><repeal></code> and closing <code></repeal></code> tags, and insert the new wording, bracketed by opening <code><addition></code> and closing <code></addition></code> tags.
-*Automatically insert the annotation for this amendment at the end of the <strong>amended provision</strong>, including the <strong>In Force Date Qualification</strong>, e.g.
+*Automatically insert the annotation for this amendment at the end of the <strong>amended provision</strong>, including the <strong>In Force Date Qualification</strong> (for partially in force amendments), e.g.
   Words in Sch. 7 para. 5(7) substituted (31.1.2017 <span style = "color:red;">for specified purposes</span>) by Policing and Crime Act 2017 (c. 3), s. 183(1)(5)(e), Sch. 2 para. 122(3)
 *Generate a green tick next to the task in the <strong>Resource Manager</strong> window to show that it has been completed.
@@ Line 173: / Line 253: @@
 Once the amendment has been made, the cursor will be situated at the point the automatic annotation was inserted in the <strong>amended provision</strong> window.
-Your next task will be to [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_in_XMetaL | check the amendment in XMetaL (Step Three)]], followed by the final task of [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_on_the_Editorial_Site | checking the amendment on the Editorial Site (Step Four)]].
+Your next task will be to [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Check_the_amendment_in_XMetaL | check the amendment in XMetaL (Step Three)]], followed by the final task of [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Preview_the_amendment_from_the_Update_Details_page | previewing the amendment from the Update Details page (Step Four)]].
 |}
-See an [[Editorial_Update/Applying_partially_in_force_amendments_which_are_then_brought_further_into_force_over_time#Substitution_of_Words_for_Specified_Purposes|example]] of a substitution of words for specified purposes.
+See the Overview for an [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Whole_extent_-_partially_in_force|example]] of a substitution of words for specified purposes.
 See [[Editorial_Update/Applying_partially_in_force_amendments_which_are_then_brought_further_into_force_over_time | Applying partially in force amendments which are then brought further into force over time]] for more details about substitutions that are brought further into force over time where text may need to be retained.
-<strong>Note:</strong>
+====Carrying out the substitution of a provision or sub-provision in XMetaL====
-*When you are substituting words, any commentary reference included in the text you highlight will be removed automatically on substitution and if this commentary reference relates to a single annotation then that annotation will also be removed automatically on check-in.
-*Occasionally there may be multiple substitutions of the same words throughout a provision.  As long as the same task in the <strong>Resource Manager</strong> window is highlighted on each occasion, it is possible to carry out the same substitution of words and generate the same commentary reference (linking to the same annotation) each time, without any unnecessary new footnote references or annotations also being created.
-*Make sure you remove any drafters’ footnotes in the amending text, otherwise these references will appear in the preview as <span style = "color:red;">‘No commentary item can be found for this reference’</span> because there is no corresponding commentary in the amended legislation.
-===Carrying out the substitution of a provision or sub-provision in XMetaL===
 If your substitution involves [[Editorial_Update/Textual_Amendments/Substitutions/Higher_Level_Substitutions#Unequal_substitutions_of_whole_provisions|unequal substitution of whole provisions]], you should follow the instructions in <strong>Higher Level Substitutions</strong>, as you will need to have checked out the parent level of the provision.
-<Strong>Note:</strong> These instructions assume you have checked out the relevant provision that is to be amended, that you have set up your [[Editorial_Update/Starting_Update_Tasks#Setting_up_your_XMetaL_workspace|XMetaL workspace]], and that you are now ready to carry out the amendment.  For guidance on the steps required to reach this point, see [[Editorial_Update/Starting_Update_Tasks|Starting Update Tasks]].
+The amendment of the data is carried out in XMetaL and the instructions that follow assume that you have checked out the relevant provision that is to be amended, that you have set up your [[Editorial_Update/Starting_Update_Tasks#Setting_up_your_XMetaL_workspace|XMetaL workspace]], and that you are now ready to carry out the amendment.  For guidance on the steps required to reach this point, see [[Editorial_Update/Starting_Update_Tasks|Starting Update Tasks]].
 {| class="wikitable" style="background-color:#f2f2f2;"
@@ Line 222: / Line 296: @@
 The C-note was removed when we substituted s. 6(1A), because the new s. 6(1A) together with the change to s. 6(2) provides textually for the inclusion of a relevant European licence. Also, the modification in S.I. 2019/700, reg. 41 lasted only “For the period of 2 years beginning with exit day” and as exit day was 31.1.2020 at 11 pm, the modification expired on 31.1.2022 at 11 pm (the precise time of the substitution of s. 6(1A)).
+See Scenarios below for further examples of [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Removal_of_an_existing_C-note_when_a_sub-provision_gets_substituted|C-notes that can be removed]] and also [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Leaving_an_existing_C-note_in_place_when_a_provision_gets_substituted|C-notes that need to be left in place]] when provisions or sub-provisions are substituted.
 </li>
@@ Line 230: / Line 308: @@
 *Read what the amendment is and where in the <strong>amended provision</strong> it is to be made.
 <br>
-<strong>Note on headings: </strong>If the provision heading is also substituted as part of the substitution, this will need to be done separately. First carry out the substitution for the provision and then substitute the new heading for the old in the <code>ukl:title</code> tags (you can copy and paste). You will then need to drag the opening <code>ukl:Substitution</code> tag to the beginning of the heading (see [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#tna-subsofprovorsubprov|example]]). If you are carrying out a limited extent or retained text substitution, you will also need to carry out the amendment separately for the heading using the same task (however this time you will need to do a limited or retained text substitution of words in the old heading for the new) and the provision. The old and new heading text should then be displayed side by side after you have carried out the relevant amendment (see [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#In_force_for_specified_purposes_only_2 | example]]).
+<strong>Note on headings: </strong>If the provision heading is also substituted as part of the substitution, this will need to be done separately. First carry out the substitution for the provision and then substitute the new heading for the old in the <code>ukl:title</code> tags (you can copy and paste). You will then need to drag the opening <code>ukl:Substitution</code> tag to the beginning of the heading (see [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#tna-subsofprovorsubprov|example]]). If you are carrying out a limited extent or retained text substitution, you will also need to carry out the amendment separately for the heading using the same task (however this time you will need to do a limited or retained text substitution of words in the old heading for the new) and the provision. The old and new heading text should then be displayed side by side after you have carried out the relevant amendment (see [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Whole_extent_-_partially_in_force_2 | example]]).
 <br>
 <br>
@@ Line 255: / Line 333: @@
 <div id="tna-wholesubsprov"></div>
-====Whole substitution====
+=====Whole substitution=====
 {| class="wikitable" style="background-color:#f2f2f2;"
@@ Line 271: / Line 349: @@
 Once the amendment has been made, the cursor will be situated at the point the automatic annotation was inserted in the <strong>amended provision</strong> window.
-Your next task will be to [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_in_XMetaL | check the amendment in XMetaL (Step Three)]], followed by the final task of [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_on_the_Editorial_Site | checking the amendment on the Editorial Site (Step Four)]].
+Your next task will be to [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Check_the_amendment_in_XMetaL | check the amendment in XMetaL (Step Three)]], followed by the final task of [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Preview_the_amendment_from_the_Update_Details_page | previewing the amendment from the Update Details page (Step Four)]].
 |}
 <div id="tna-lesubsprov"></div>
-====Limited extent substitution====
+=====Limited extent substitution=====
 For limited extent whole provision substitutions, it may not be possible to carry out a limited extent amendment without creating [[Editorial_Update/Limited_Extent_Amendments#Concurrent_Versions|concurrent versions]]. You should follow the guidance on the [[Editorial_Update/Limited_Extent_Amendments|Limited Extent amendments]] page on [[Editorial_Update/Limited_Extent_Amendments#Decision_tree_for_deciding_whether_or_not_to_create_concurrent_versions_for_a_limited_extent_amendment|deciding whether to create a concurrent version]].
@@ Line 312: / Line 390: @@
 <br>
 Once the amendment has been made, the cursor will be situated at the point the annotation was inserted in the <strong>amended provision</strong> window and you will need to scroll back up to the newly substituted sub-provision.
-<!--, where you will need to amend the tagging so that the substituted version of the sub-provision gets its own <code><ukl:P2></code> or <code><ukl:P3></code> and <code><ukl:Pnumber></code> tagging:
+<strong>If the option to carry out the substitution on the <code><ukl:P2></code> or <code><ukl:P3></code> tagging is not available to you</strong>, you will need to select the <code><ukl:P2para></code> or <code><ukl:P3para></code> tagging, carry out the substitution as described above, and then you will need  to amend the tagging so that the substituted version of the sub-provision gets its own <code><ukl:P2></code> or <code><ukl:P3></code> and <code><ukl:Pnumber></code> tagging:
 <br>
 <br>
@@ Line 358: / Line 437: @@
 <br>
 [[File:Substitution_of_sub-provision_LE6.png|center]]
--->
+<br>
-There are now two versions of the sub-provision when you preview your amendment, each with its own set of square brackets and F-note reference:
+<br>
+Whichever way you carry out the sub-provision substitution, once you have finished carrying out the amendment and you preview your amendment, there should be two versions of the sub-provision, each with its own set of square brackets and the same F-note reference:
 <br>
 <br>
@@ Line 370: / Line 450: @@
 <br>
-You can now move on to carry out the rest of the [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_in_XMetaL | checks in XMetaL (Step Three)]], followed by the final task of [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_on_the_Editorial_Site | checking the amendment on the Editorial Site (Step Four)]].
+Your next task will be to [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Check_the_amendment_in_XMetaL | check the amendment in XMetaL (Step Three)]], followed by the final task of [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Preview_the_amendment_from_the_Update_Details_page | previewing the amendment from the Update Details page (Step Four)]].
 |}
-See the Overview for an [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Limited_extent_substitution_of_a_provision_or_sub-provision | example]] of a limited extent substitution of a sub-provision and further reading on limited extent amendments can be found [[Editorial_Update/Limited_Extent_Amendments|here]].
+See the Overview for an [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Limited_extent_-_wholly_in_force_2 | example]] of a limited extent substitution of a sub-provision and further reading on limited extent amendments can be found [[Editorial_Update/Limited_Extent_Amendments|here]].
 <div id="tna-spsubsprov"></div>
-====Retained text substitution====
+=====Retained text substitution=====
-If your amendment is not ‘wholly in force’ and has a different type of <strong>In Force Date Qualification</strong>, e.g. ‘for specified purposes’, or the effect itself is qualified in some way, e.g. ‘substituted for specified purposes’  you may need to consider carrying out a <strong>retained text</strong> substitution so that the existing provision/sub-provision is retained alongside the newly substituted provision/sub-provision; however this is not always straightforward and may not always be possible, so check with a <strong>Review Editor</strong> if you are not sure. For further guidance on retaining text for partially in force amendments see [[Editorial_Update/Applying_partially_in_force_amendments_which_are_then_brought_further_into_force_over_time#Partially_in_force_amendments | Applying partially in force amendments which are then brought further into force over time - Partially in force amendments]].
+If your amendment has only been [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Partially_in_force_amendments|brought into force for specified purposes]], you may need to carry out a <strong>retained text</strong> substitution to make sure that the existing provision/sub-provision is retained alongside the newly substituted provision/sub-provision; however this is not always straightforward and may not always be possible, so check with a <strong>Review Editor</strong> if you are not sure. For further guidance on retaining text for partially in force amendments see [[Editorial_Update/Applying_partially_in_force_amendments_which_are_then_brought_further_into_force_over_time#Partially_in_force_amendments | Applying partially in force amendments which are then brought further into force over time - Partially in force amendments]].
 See an example of a retained text whole provision substitution here: https://www.legislation.gov.uk/uksi/2010/2214/regulation/23/2013-01-09.
-For a retained text substitution of a sub-provision, you can carry out a limited extent substitution having selected the relevant <ukl:P2> or <ukl:P3> tagging (as described in Step One above, although note this is slightly different to the description in Step One where <ukl:P#para> tags are selected for whole extent and wholly in force substitutions of sub-provisions. Note that if you were to carry out a limited extent sub-provision substitution on the <ukl:P#para> tags, you would also need to create the <ukl:P#> tagging for the substituted version after carrying out the substitution).
+For a retained text substitution of a sub-provision, you can carry out a retained text substitution having selected the relevant <ukl:P2> or <ukl:P3> tagging (as described in Step One above, although note this is slightly different to the description in Step One where <ukl:P#para> tags are selected for whole extent and wholly in force substitutions of sub-provisions. Note that if you were to carry out a limited extent sub-provision substitution on the <ukl:P#para> tags, you would also need to create the <ukl:P#> tagging for the substituted version after carrying out the substitution).
 {| class="wikitable" style="background-color:#f2f2f2;"
@@ Line 462: / Line 542: @@
 Once the amendment has been made, the cursor will be situated at the point the automatic annotation was inserted in the <strong>amended provision</strong> window.
-Your next task will be to [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_in_XMetaL | check the amendment in XMetaL (Step Three)]], followed by the final task of [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_on_the_Editorial_Site | checking the amendment on the Editorial Site (Step Four)]].
+Your next task will be to [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Check_the_amendment_in_XMetaL | check the amendment in XMetaL (Step Three)]], followed by the final task of [[Editorial_Update/Textual_Amendments/Insertions/Provision_Level_Insertions#Preview_the_amendment_from_the_Update_Details_page | previewing the amendment from the Update Details page (Step Four)]].
 |}
-===Checking the amendment in XMetaL===
+====Check the amendment in XMetaL====
-{| class="wikitable"
-|<strong>Related reading:</strong> [[Editorial_Update/Approach_to_Update_-_Some_Basic_Rules_and_Exceptions|Approach to Update - Some Basic Rules and Exceptions]]
-|}
 {| class="wikitable" style="background-color:#f2f2f2;"
 |<strong>Step Three</strong>
-<ol><li>Once the amendment has been made, and the annotation has been automatically generated, check that the annotation is accurate and complete. Carry out any edits if necessary (refer back to the effects spreadsheet if you need to):
+<br>
+<ol><li><span style = "color:red;"><strong>Whilst still in XMetaL, you need to check that the amendment has been carried out correctly and that the annotation is accurate and complete by carrying out all the checks detailed in the</span> [[Editorial_Update/Update_Editor_Checklist#After_you_have_carried_out_the_amendment_in_the_XML|Update Editor Checklist]]</strong>.</li>
+<!--<ol><li>Once the amendment has been made, and the annotation has been automatically generated, check that the annotation is accurate and complete. Carry out any edits if necessary (refer back to the effects spreadsheet if you need to):
 <br>
 <br>
@@ Line 490: / Line 568: @@
 <li>Scroll back up to the where the amendment was made in the <strong>amended provision</strong> and check that the substituted wording, provision or sub-provision is positioned correctly and has opening and closing brackets around it. For any retained and inserted text check that this is positioned correctly and surrounded by opening and closing brackets. Delete any unnecessary spaces between the existing punctuation and the substituted tags and words, or insert a space if appropriate.
 </li>
-<br>
 <br>
 <u>Substitution of words</u>
@@ Line 502: / Line 579: @@
 <br>
 <br>
 <u>Example of a substitution of words: substitution of "Welsh Ministers" for "Secretary of State"</u>
@@ Line 511: / Line 591: @@
 See on the published site [http://www.legislation.gov.uk/ukpga/1988/41/schedule/8/paragraph/10 1988 c. 41 sch. 8 para. 10]
+-->
+<br>
 <br>
-<u>Substitution of a provision or sub-provision</u>
+<li><strong>Remember to move the opening square bracket if you substituted a provision or a sub-provision.</strong> If you substituted a <strong>whole provision</strong>, the opening bracket for the substitution will automatically be positioned within the <code>ukl:Pnumber</code> tag before the first sub-provision number inside the <code>ukl:P1para</code> tagging. You need to adjust the position of the opening bracket to include the provision number by moving (by clicking on the tag and dragging it) the opening <code>ukl:Substitution</code> tag to just before the provision number within the <code>ukl:Pnumber</code> of the provision. If your substitution also included the provision heading, you need to adjust the position of the opening bracket to include that, e.g.
-If you substituted a <strong>whole provision</strong>, the opening bracket for the substitution will automatically be positioned within the <code>ukl:Pnumber</code> tag before the first sub-provision number inside the <code>ukl:P1para</code> tagging. You need to adjust the position of the opening bracket to include the provision number by moving (by clicking on the tag and dragging it) the opening <code>ukl:Substitution</code> tag to just before the provision number within the <code>ukl:Pnumber</code> of the provision. If your substitution also included the provision heading, you need to adjust the position of the opening bracket to include that, e.g.
 <div id="tna-subsofprovorsubprov"></div>
 Original location of <code>ukl:Substitution</code> tag:
@@ Line 528: / Line 607: @@
 <br>
-Similarly, if you substituted a <strong>sub-provision</strong>, the opening bracket for the substitution will automatically be positioned just inside the first <code>ukl:Text</code> tag of the <code>ukl:P2para</code> or <code>ukl:P3para</code> tagging that you selected. You need to adjust the position of the opening bracket to include the sub-provision number by moving (by clicking on the tag and dragging it) the opening <code>ukl:Substitution</code> tag to just before the sub-provision number within the relevant <code>ukl:Pnumber</code> tag.
+Similarly, if you substituted a <strong>sub-provision</strong>, the opening bracket for the substitution will automatically be positioned just inside the first <code>ukl:Text</code> tag of the <code>ukl:P2para</code> or <code>ukl:P3para</code> tagging that you selected. You need to adjust the position of the opening bracket to include the sub-provision number by moving (by clicking on the tag and dragging it) the opening <code>ukl:Substitution</code> tag to just before the sub-provision number within the relevant <code>ukl:Pnumber</code> tag.</li>
+<br>
+<br>
+<li>Don't forget to make sure that you
+<strong>[[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#.E2.80.98Tidying_up.E2.80.99_amendment_text:_fixing_incorrectly_tagged_amending_provisions_and_removing_unwanted_tagging|remove any tagging that is not required in the amendment text]]</strong> and that you have have set the [[Editorial_Update/XMetaL_and_XML_tagging#ConfersPower_Attribute|ConfersPower attribute]] to "true" for any <strong>power-conferring provisions</strong>. </li>
 <br>
 <br>
-*Check that the <strong>extent</strong> of your substituted provision is correct.  If the RestrictExtent attribute is blank, the provision will inherit the extent of the parent into which it has been substituted so you need to check that this is correct. See more on the [[Editorial_Update/XMetaL_and_XML_tagging#RestrictExtent_Attribute|RestrictExtent Attribute]].
+<li>Remember to <strong>check that the extent of your substituted provision</strong> is correct.  If the RestrictExtent attribute is blank, the provision will inherit the extent of the parent into which it has been substituted so you need to check that this is correct. See more on the [[Editorial_Update/XMetaL_and_XML_tagging#RestrictExtent_Attribute|RestrictExtent Attribute]].</li>
-*If your substitution includes any <strong>power-conferring provisions</strong> (marked in TOEs Comments for Editor as "Contains power"), you will need to set the ConfersPower attribute to "true" for those provisions. See more on the [[Editorial_Update/XMetaL_and_XML_tagging#ConfersPower_Attribute|ConfersPowerAttribute]].
+<!--*If your substitution includes any <strong>power-conferring provisions</strong> (marked in TOEs Comments for Editor as "Contains power"), you will need to set the ConfersPower attribute to "true" for those provisions. See more on the [[Editorial_Update/XMetaL_and_XML_tagging#ConfersPower_Attribute|ConfersPowerAttribute]].
 *Look out for and remove any Non Breaking Space Characters that may have been added to the amended provision by your substitution. See more on  [[Editorial_Update/Approach_to_Update_-_Some_Basic_Rules_and_Exceptions#Non_Breaking_Space_Characters|Non Breaking Space Characters]].
 <br>
 See also:</strong> [[Editorial_Update/Approach_to_Update_-_Some_Basic_Rules_and_Exceptions|Approach to Update - Some Basic Rules and Exceptions]] for further guidance on other edits you may need to make.
+-->
+<br>
+<br>
 <li>Once you are satisfied that the amendment is correct and complete, select <strong>Legislation - Check In</strong> on the menu bar at the top of the page:
 <br>
@@ Line 547: / Line 632: @@
 <li>Click <strong>OK</strong> in the pop-up  [[File:Document_is_checked_in_successfully.png|link=]]</li>
 <br>
-<li>Close the <strong>amending provision</strong> window and go back to the Editorial Site to check the amendment in [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Checking_the_amendment_on_the_Editorial_Site|Step Four]] (leaving XMetaL open if you have more update to do after this amendment).</li></ol>
+<br>
+<li>Close the <strong>amending provision</strong> window and go back to the Editorial Site to check the amendment in [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#Preview_the_amendment_from_the_Update_Details_page|Step Four]] (leaving XMetaL open if you have more update to do after this amendment).</li></ol>
 |}
-===Checking the amendment on the Editorial Site===
+====Preview the amendment from the Update Details page====
-{| class="wikitable"
-|<strong>Related reading:</strong> [[Editorial_Update/Approach_to_Update_-_Some_Basic_Rules_and_Exceptions|Approach to Update - Some Basic Rules and Exceptions]]
-|}
 {| class="wikitable" style="background-color:#f2f2f2;"
@@ Line 563: / Line 645: @@
 <li>If there was anything unusual about the amendment that you need to draw to the attention of the review editor, you can add a note by clicking on the note icon to the right of the edit status.</li>
 <br>
-<li>View your amendment by selecting the <strong>Newly Edited Version</strong> tab (to see the provision text and a summary of the provision attributes) or the <strong>Preview Legislation</strong> button (to see a website <strong>Preview</strong> of the provision). Check that:
+<li>View your amendment by selecting the <strong>Newly Edited Version</strong> tab (to see the provision text and a summary of the provision attributes) or the <strong>Preview Legislation</strong> button (to see a website <strong>Preview</strong> of the provision).
+<br>
+<br>
+Tip: If you need to check any of the attributes of the provision you have amended, this can easily be done by selecting the <strong>Newly Edited Version</strong> tab where you will see the relevant attributes of your provision listed.
+<br>
+<br>
+<li><strong><span style = "color:red;">Carry out all the checks detailed in the</span>  [[Editorial_Update/Update_Editor_Checklist#Preview:_double_check_the_point_in_time_.28PiT.29.2C_amendment_and_annotation_before_moving_on|Update Editor Checklist]]<span style = "color:red;">, to make sure that the amendment is accurate and complete.</span></strong></li>
+<!-- Check that:
 *your amendment is in the right place, is formatted as you would expect and that the amendment is surrounded by correctly placed square brackets. You can see examples of what these amendments should look like in the [[Editorial_Update/Textual_Amendments/Substitutions/Provision_Level_Substitutions#OVERVIEW|Overview]]. Look out for any issues such as as the [[Editorial_Update/Approach_to_Update_-_Some_Basic_Rules_and_Exceptions#Closing_square_bracket_for_an_amendment_slipping_to_the_end_of_the_provision_on_check_in|closing bracket for an amendment slipping to the end of the provision on check-in]].
@@ Line 574: / Line 663: @@
 <br>
 <li>In the <strong>Preview</strong> check the timeline and see how the provision would look in the context of the whole item of legislation. Make sure that the correct <strong>Point in Time</strong> has been created on the timeline to accommodate your amendment and that you can move between the Points in Time on the timeline correctly. If there are any errors in the timeline, correct them using the [[Editorial_Update/Update_Troubleshooting#Issue:_Timeline_errors_-_using_the_Timeline_Resolver|Timeline Resolver]].</li>
+-->
 <br>
-<li>If you need to make any corrections to the amendment, check the provision back out and make any changes as necessary in XMetaL before checking the provision back in and previewing the provision again. Note that if you only need to correct an annotation, you can click on the <strong>Edit</strong> button to the right of the annotation in <strong>Preview</strong> to edit it without having to check the provision out again in XMetaL.</li>
+<li>If you need to make any corrections to the amendment, check the provision back out and make any changes as necessary in XMetaL before checking the provision back in and previewing the provision again. Note that if you only need to correct an annotation, you can click on the <strong>Edit</strong> button to the right of the annotation in <strong>Preview</strong> to edit it without having to check the provision out again in XMetaL, but beware of the [[Editorial_Update/Annotation_Conventions#Editing_annotations_in_the_website_preview|bugs you may encounter when using the annotation Edit function in preview]].</li>
 <br>
 <li>Once you have finished checking the amendment on the Editorial Site, the update task will be complete and you can [[Editorial_Update/Starting_Update_Tasks#Navigating_the_Update_Task|move on]] to your next update task.</li></ol>
@@ Line 582: / Line 673: @@
 ==SCENARIOS==
-See also [[Editorial_Update/Editorial_Practice_Guide#SPECIFIC_UPDATE_ISSUES|Specific Update Issues]].
+{| class="wikitable"
+|<strong>Related reading:</strong> [[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#APPROACH_TO_UPDATE_-_SOME_BASIC_RULES_AND_EXCEPTIONS|Approach to Update - Some Basic Rules and Exceptions]], [[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#SPECIFIC_UPDATE_ISSUES|Specific Update Issues]]
+|}
 ===Unequal substitution of sub-provisions===
@@ Line 632: / Line 724: @@
 <strong>Result:</strong> See [https://www.legislation.gov.uk/ukpga/2008/17/section/178/2012-04-01 2008 c. 17, s. 178]
+===Removing or keeping existing annotation references when a provision or sub-provision gets substituted===
+====Removal of an existing C-note when a sub-provision gets substituted====
+On 21/3/2024, 2004 c. 30, s. 1(12) gets substituted by [https://www.legislation.gov.uk/uksi/2024/221/regulation/3/made S.I. 2024/221, reg. 3]:
+ S. 1(12)(a) substituted (21.3.2024) by The Medical Devices (In Vitro Diagnostic Devices etc.) (Amendment) Regulations 2024 (S.I. 2024/221), regs. 1(2), 3
+There is an existing C-note in s. 1, for the modification of s. 1(12)(a) on 31/12/2020 by S.I. 2002/618, reg. 4T(1) (as inserted by The Medical Devices (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/791), regs. 1(1), 3(7) (as amended by S.I. 2020/1478, regs. 1(3), Sch. 2 para. 2); 2020 c. 1, Sch. 5 para. 1(1)):
+https://www.legislation.gov.uk/ukpga/2004/30/section/1/2020-12-31#section-1-12-a
+But reg. 4T(1) is also omitted (21.3.2024) by [https://www.legislation.gov.uk/uksi/2024/221/regulation/13/made S.I. 2024/221 reg. 13], so the C-note is not needed anymore and is therefore removed when the substitution is carried out:
+https://www.legislation.gov.uk/ukpga/2004/30/section/1/2024-03-21#section-1-12-a
+====Leaving an existing C-note in place when a provision gets substituted====
+On 4/3/2024, 2006 c. 46 gets fully substituted by [https://www.legislation.gov.uk/ukpga/2023/56/section/28#section-28-3 2023 c. 56, s. 28(3)]:
+ S. 86 substituted (26.10.2023 for specified purposes, 4.3.2024 in so far as not already in force) by Economic Crime and Corporate Transparency Act 2023 (c. 56), ss. 28(3), 219(1)(2)(b); S.I. 2024/269, reg. 2(v)
+https://www.legislation.gov.uk/ukpga/2006/46/section/86/2024-03-04
+There are two existing notes in s. 86, both of which remain in force (one of which itself gets amended on 4/3/2024):
+https://www.legislation.gov.uk/uksi/2009/1804/regulation/16/2024-03-04
+https://www.legislation.gov.uk/uksi/2009/2436/schedule/1/paragraph/5
+The C-notes were therefore left in place when the substitution of s. 86 was carried out.
 ==RELATED PAGES==
@@ Line 646: / Line 771: @@
 Approach, errors and troubleshooting:
-*[[Editorial_Update/Editorial_Practice_Guide#APPROACH_TO_UPDATE_-_SOME_BASIC_RULES_AND_EXCEPTIONS|Approach to Update - Some Basic Rules and Exceptions]]
+*[[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#APPROACH_TO_UPDATE_-_SOME_BASIC_RULES_AND_EXCEPTIONS|Approach to Update - Some Basic Rules and Exceptions]]
-*[[Editorial_Update/Editorial_Practice_Guide#SPECIFIC_UPDATE_ISSUES|Specific Update Issues]]
+*[[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#SPECIFIC_UPDATE_ISSUES|Specific Update Issues]]
-*[[Editorial_Update/Editorial_Practice_Guide#UPDATE_TROUBLESHOOTING|Update Troubleshooting]]
+*[[Editorial_Update/Approach_to_Update,_Specific_Update_Issues_and_Update_Troubleshooting#UPDATE_TROUBLESHOOTING|Update Troubleshooting]]